Product Description

Analog / Digital Trainer Board

• Brand: MCP
• Model: M21-7000
• Country of origin: China
• Country of manufacture: China

Feature:

• High level,high quality digital-analog trainer
• Combines all essential function of analog and digital  experiment.With removable breadboard, 
• DC power supply,  function generator, two pulse switches, 2 1/4 inch  8 ohm 0.25W speaker and etc
• Heavy Duty with friendly usable

Technical Specification:

• SOLDER LESS BREADBOARD: Interconnected with 2820 tie points nickel plated contact,fitted all DIP sizes and all components with lead
• and solid wire AWG # 22-30 (0.3-0.8mm).It can be changed and replaced for different purpose and can be
• connected with demonstration panel. Therefore, it is very convenient for both teachers and students.
• DC POWER SUPPLY: 
• Ａ．Fixed DC output: +5V, 1A
• Ｂ．Fixed DC output: -5V, 1 A.
• Ｃ．Variable DC output: 0V to +15V, 1 A.
• Ｄ．Variable DC output: 0V to –15V, 1 A.
• POTENTION METERS:
• A. Variable resistor VR1: 1kΩ
• B. Variable resistor VR2: 100kΩ
• FUNCTION GENERATOR: 
• (a) Frequency range: 1Hz－10Hz, 10Hz－100Hz, 100Hz－1kHz, 1kHz－10kHz, 10kHz－100kHz
• (b) Amplitude: Sine wave output：0－10 Vpp variable Triangle wave output：0－10 Vpp variable Square wave output：0－10 Vpp variable TTL mode output：4 Vpp
• TWO DIGITS OF 7 SEGMENT LED DISPLAY:
• TWO PULSE SWITCH:
• SIXTEEN BITS DATA SWITCHES : 
• 16pcs toggle switches and corresponding output point. 
• When switch is set at down position,the output is LO level; contrarily, it is to be HI level while setting at up position. 
• TWO PULSE SWITCH (WITH 2 SET OF OUTPUT (A , A ,B , B)) 2pcs pushbuttons contain switches debouncer for eliminating the bounce caused by switch from open to close or from close to open position
• SPEAKER:
• SPEAKER:  2-1/2 inch diameter, 8 ohm/0.5W to be used for load.
• FOUR CHANNEL ADAPTER 
• FOUR CHANNEL ADAPTER: Both of the two banana sockets’ and two BNC jacks’ point tips are changeable. It is suitable for M21-7000 to be connected with peripherals
• TWO DIGITS OF 7 SEGMENT LED DISPLAY (A) Output display Numerical designs and resultant displays
• SIXTEEN BITS LED DISPLAY 16 red LED's separate input terminals. The LED will be lighted up when input is at HI level ,and it will be turned off when it is at no input or at LO level 
• UNIVERSAL CONNECTOR FIXED HOLDER: 
• It reserves universal connector fixed holder on the panel in order to be connected with various universal connectors, which are available: 
• (1) Straight header 60 pin
• (2) Card edge connector 2.54mm 62pin
• (3) D sub25 pin connector, male & female
• (4) Card edge connector 3.96mm 56pin
• (5) Dip sockets connector 28 pin & 40 pin
• 
  
• OTHER STANDARD ACCESSORIES:
• (1) Power cord
• (2) Pin: 10pcs 
• (3) User manual x 1